Skip to content

On site across Algeria

Remote monitoring of your pumping stations

Follow your pumps from your phone: tank level, pressure, pump status and faults. We build the control panel with its PLC, sensors and a 4G router: the station runs on its own, you receive alarms by SMS and you can start or stop the pumps remotely. Describe your station below: we prepare a free quote.

How your station works

Four parts, one goal: water when it is needed, without travelling to the site.

  1. 1Measure

    A probe measures the tank level, a sensor the water pressure.

  2. 2Decide

    The PLC in the panel starts and stops the pumps on its own, according to the level.

  3. 3Send

    A 4G router sends the data, even far from town, without an Internet line.

  4. 4Follow

    You see everything on your phone and get an SMS when something goes wrong.

Station 1 · BoreholeOnline

Level

72 %

Pressure

3,2 bar

Pump 1RunningPump 2FaultTank
StartStop

SMS

Station 1: pump 2 fault. Pump 1 has taken over.

Example screen

What you see on your phone

  • Live level

    Watch the tank fill and empty, as a percentage.

  • Status of each pump

    Green: running. Grey: stopped. Red: fault.

  • Remote start and stop

    Password-protected. The safeties stay in the panel.

  • SMS alarms

    A message on your phone, even when the app is closed.

What if…

  • The 4G network drops?

    The station keeps running on its own. Monitoring resumes when the network is back.

  • The borehole runs dry?

    The pumps stop so they never run dry, and you get an SMS.

  • A pump fails?

    The other pump takes over, and you are warned by SMS.

  • The tank is full?

    The pumps stop on their own: no overflow, no wasted energy.

What you see remotely

  • Tank or borehole level
  • Pressure and flow
  • Status of each pump: running, stopped, fault
  • History and monthly report: running hours, volumes

What the panel does on site

  • Automatic run on level (borehole to tank)
  • Pump rotation to share the wear
  • Protection against dry running and electrical faults
  • Drive start when needed, to protect pumps and pipes
  • Safeties stay on site, even without network

What you get

  • A study of the station and a free quote
  • The panel wired, programmed and commissioned
  • Viewing on phone and PC, SMS alarms
  • Training and the installation file
Remote monitoring of your pumping stations

Brands and software

  • Siemens
  • Schneider
  • Delta
  • LS
  • ABB
  • Schneider Altivar
  • Siemens Sinamics
  • Danfoss
  • INVT

How it works

  1. 1

    You describe the machine or the project by phone, WhatsApp or with the form (photos and part numbers welcome).

  2. 2

    We study the need and send you a free quote before any work.

  3. 3

    We work on site or in the workshop, with tests and a backup handed over at the end.

Frequently asked questions

Do we need Internet on site?

No: the panel uses a 4G router with a SIM card. Only mobile coverage is needed on site; we check it during the visit.

What happens if the network drops?

The station keeps running on its own: the PLC handles levels and safeties on site. Remote monitoring resumes as soon as the network is back.

Can we keep our pumps and panel?

Often, yes: we can upgrade an existing panel. The study says what can be kept.

How much does remote monitoring cost?

It depends on the number of stations and pumps, the power and what you want to follow. Fill in the form above: we send you a free quote.

Configure your remote monitoring

Quick answer by phone or WhatsApp, free quote before any work, anywhere in Algeria.

Describe your station

Three questions, one minute. The details are settled together during the visit.

1Your station

2Your pumps

3What you want to follow remotely

Your details

We study your station and send you a free quote, often after a site visit.

Please give at least a phone number or an email so we can reply.

Send via WhatsApp