On site across Algeria
PLC programming in Algeria
A new machine, a change to a cycle, a lost program or an obsolete PLC: we write, change and commission PLC programs for all the main brands. We work on site anywhere in Algeria from our workshop in Médéa, and we always hand you a documented backup of the program.
On the floor
Logic proven on the machine, not only at the desk
A program that runs on a laptop is only a starting point. On the machine it must handle a sensor that misses a part, a jam, an emergency stop mid-cycle, a power cut and the restart that follows.
We write the logic from how your machine really works: its sensors, motors, drives and sequences. Then we test it on site with your operators — start-ups, emergency stops, faults, restarts — before handing production back to you.
What we deliver
Program, screens, panel, commissioning
- 01
New programs
Structured, commented logic for a new or modified machine: cycles, safety functions, fault handling, communication. Siemens TIA Portal and Step 7, Schneider, Omron, Delta, LS, Xinje, Fatek, Mitsubishi.
- 02
Existing machines and lost programs
Taking over an existing program, a new cycle, extra inputs / outputs. Lost program: we recover it when the PLC allows, otherwise we rewrite it by watching the machine.
- 03
HMI and supervision
Clear operator screens: the state of each piece of equipment, plain-language alarms, counters, recipes. The screen shows what the PLC is really doing.
- 04
Panel and commissioning
Diagrams, design and wiring of the control panel, then on-site commissioning: each sequence is tested with your operators.
One point of contact, from the PLC to the panel
A control fault often drags on because everyone points at someone else: the electrician at the programmer, the programmer at the machine supplier. At MTE the program, the screens, the panel and the commissioning are done by the same team. If something doesn’t work, you know who to call.
What you get
- The commented source program, not only the version loaded in the PLC
- A backup to keep away from the machine
- Short documentation of the changes

Brands and software
- Siemens S7-200/300/1200/1500
- Siemens LOGO!
- Schneider Modicon
- Schneider Zelio
- Omron
- Fatek
- LS (XGB/XGT)
- Xinje
- Delta
- Mitsubishi
Why it’s different
6 benefits for your maintenance team
Documentation you can use
Commented source program, I/O list, backup and change notes: your team troubleshoots from the documents, not from a phone call.
Code you can take over
Blocks organised by function, clear tag names, comments: no black box, no dependence on one person.
Works with what you have
Profinet, Modbus RTU and TCP, existing screens and drives: we work with your equipment instead of replacing everything.
Fast diagnosis
Diagnosis within 24 to 48 h, on site anywhere in Algeria, or remotely from a video and the program.
Your program protected
A copy of every version and a label in the panel: the next breakdown doesn’t become a stop of several days.
A clear quote before we start
Free quote, with the work and the timing in writing before the job.
Why MTE
What sets us apart
- Those who write it commission itThe program is commissioned by the people who wrote it, on the machine, with your operators.
- Real projectsSiemens ET200 and KTP1200 screen upgrade at the Algiers metro, PLC and screen retrofit of a carton production line, programming of an industrial vacuum system.
- Close to your plantsWorkshop in Médéa, about one hour from Blida and an hour and a half from Algiers; on site anywhere in Algeria.
- In French, Arabic and EnglishDiscussion and documentation in your team’s language, and your foreign suppliers’.
How it works
- 1
You describe the machine or the project by phone, WhatsApp or with the form (photos and part numbers welcome).
- 2
We study the need and send you a free quote before any work.
- 3
We work on site or in the workshop, with tests and a backup handed over at the end.
Frequently asked questions
Which PLC brands do you program?
Siemens (S7-200, S7-300, S7-1200, S7-1500, LOGO!) with TIA Portal and Step 7, Schneider (Modicon, Zelio), Omron, Fatek, LS (XGB/XGT), Xinje, Delta and Mitsubishi, with their HMI screens.
My machine’s program is lost: can you recover it?
Often yes: we read the program in the PLC when possible, then document it. When it cannot be recovered, we rewrite it from how the machine works, with your operators.
Can you replace a PLC that is no longer made?
Yes. We migrate the program to a current PLC (for example S7-300 to S7-1200 or S7-1500), keeping the machine’s behaviour, then commission it on site.
How long does it take and how much does it cost?
It depends on the machine: a few days for a small machine, more for a full line. We give a free quote before any work.
Do you work anywhere in Algeria?
Yes. Our workshop is in Hai Damiette, Médéa; we travel across Algeria, and quickly to Blida, Algiers, Médéa and Tipaza.
Further reading
Our other services
- HMI and SCADA programming
- Factory SCADA supervision
- Pumping station remote monitoring
- VFD and servo set-up
- Injection moulding machines
- Machine program backup
- CO2 laser and CNC machine repair
- Migration and modernisation
- Electrical design and instrumentation
- Generator installation and repair
- Maintenance contract
- All our services
Tell us about your machine
Quick answer by phone or WhatsApp, free quote before any work, anywhere in Algeria.



